The ECM (Error Correction Mode) detects and corrects errors that occur during fax transmissions. It helps in minimizing sending errors caused by a poor connection.
|
NOTE
|
|
Check if the ECM is enabled on the receiving fax machine
The ECM is effective only when it is enabled on both machines.
|
|
An error occurs when the ECM is enabled
The error may be caused by poor telephone line conditions.
|
|
When telephone line conditions are poor
It may take additional time to send your fax if a problem occurs when sending over the telephone line.
|
How to access the option
[
] (Menu) -> <Fax Settings> -> <RX Function Settings> -> <ECM RX>
] (Menu) -> <Fax Settings> -> <RX Function Settings> -> <ECM RX>Settings
(Bold: Default setting)
|
Off
|
Disable the ECM.
|
|
On
|
Enable the ECM.
|