|
Before loading the paper in the paper cassette, see "Attention (Loading Paper)."
|
|
NOTE
|
|
How to load the paper in the optional paper cassette (Cassette 2) (MF8380Cdw only): Same as in Cassette 1.
|
1.
Pull out the paper cassette.
Hold the paper cassette with both hands.
|
MF8380Cdw
|
 |
MF8080Cw/MF8010Cn
|
 |
 |
2.
Spread the paper guides a little wider than the actual paper width.
|
(1)
|
Slide the side paper guides.
Holding the lock release lever, slide the paper guides.
|
|
 |
The side paper guides move together.
|
|
|
|
The lock release lever is not installed in MF8080Cw/MF8010Cn.
|
|
|
(2)
|
Slide the paper guide at the front center.
Holding the lock release lever, slide the paper guides.
|
|
|
MF8380Cdw
|
|
MF8080Cw/MF8010Cn
|
 |
 |
When loading Legal size paper
Holding the lock release lever at the front right, adjust the length of the paper cassette.
|
MF8380Cdw
|
|
MF8080Cw/MF8010Cn
|
 |
 |
|
|
If you want to change the size of the paper to be loaded, be sure to register the paper size in "Setting the Paper Size and Type."
|
3.
Load the paper so that the edges of the paper stack are aligned with the rear side of the paper cassette.
Load the paper in portrait orientation.
|
MF8380Cdw
|
|
MF8080Cw/MF8010Cn
|
 |
 |
<Precautions when loading small size paper>
If the paper is curled, flatten the paper and load it. If you do not flatten the paper, the printout may be printed askew or the images may be printed skewed.
When loading envelopes
|
(1)
|
Close the envelope flap.
 |
|
(2)
|
Place the stack of envelopes on a flat surface, flatten them to release any remaining air, and be sure that the edges are pressed tightly.
 |
|
(3)
|
Loosen any stiff corners of the envelopes and flatten curls as shown in the figure.
 |
|
(4)
|
Align the edges of the envelopes on a flat surface.
 |
|
(5)
|
Load the envelopes into the paper cassette with the print side up.
|
4.
Align the paper guides securely against the edges of the paper.
|
(1)
|
Slide the side paper guides.
Holding the lock release lever, slide the paper guides to be aligned with the width of the loaded paper.
|
||||||
|
(2)
|
Slide the paper guide at the front center.
Holding the lock release lever, slide the paper guide to be aligned with the length of the loaded paper.
|
|
IMPORTANT
|
|
Be sure to align the paper guides securely against the edges of the paper.
If the paper guides are too loose or too tight, this may result in misfeeds or paper jams.
 |
5.
Hold down the paper, then set it under the hooks (A) on the paper guides.
Make sure that the paper stack does not exceed the line of the load limit mark (B).
|
MF8380Cdw
|
|
MF8080Cw/MF8010Cn
|
 |
 |
6.
Insert the paper cassette into the machine.
Push it into the machine firmly.
When loading Legal size paper
The front side of the paper cassette is not flush with the front surface of the machine as shown in the figure. However, you can continue to use the machine as is.
7.
Specify the loaded paper size and type.