Select the communication method and Ethernet connection type.
1.
Press [
] (Menu).
] (Menu).2.
Select <Network Settings> using [
] or [
], and then press [OK].
] or [], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
] (Log In/Out).
] (Log In/Out).
3.
Select <Ethernet Driver Settings> using [] or [], and then press [OK].
] or [], and then press [OK].
4.
Select <Auto Detect> using [] or [], and then press [OK].
] or [], and then press [OK].
5.
Select the auto detect using [] or [], and then press [OK].
] or [], and then press [OK].
|
<Off>
|
Select the communication mode and Ethernet type manually. Proceed to Step 6..
|
|
<On>
|
Select the communication mode (Half duplex/Full duplex) and Ethernet type (100Base-TX/10Base-T) automatically. Proceed to Step 11..
|
Select <Communication Mode> using [] or [], and then press [OK].
] or [], and then press [OK].
7.
Select the communication mode using [] or [], and then press [OK].
] or [], and then press [OK].
|
<Half Duplex>
|
Send and receive data in both directions, but not at the same time.
|
|
<Full Duplex>
|
Send and receive data in both directions simultaneously.
|
8.
Select <Ethernet Type> using [] or [] and press [OK].
] or [] and press [OK].
9.
Select the Ethernet type using [] or [], and then press [OK].
] or [], and then press [OK].
|
<10 Base-T>
|
Establish 10Base-T connections.
|
|
<100 Base-TX>
|
Establish 100Base-TX connections.
|
10.
Select <Apply> using [] or [], and then press [OK].
] or [], and then press [OK].
Press [] (Menu) to close the menu screen.
] (Menu) to close the menu screen.12.
Restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.