|
|
---|
For more information on how to check, refer to the instruction manual of the wireless LAN router or access point, or contact the manufacturer.
|
It may be indicated as access point name or network name.
|
It may be indicated as encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key.
|
NOTE
|
Checking for SSID and Network Keys
There are cases when the defaults are written on the body of the wireless LAN router or access point. If the settings for the wireless LAN router or access point have been changed or are not written, or if you are not sure of the settings, see the following.
|
(1)
|
Select the authentication method with [] or [], and then press [OK].
|
(2)
|
Select <Edit WEP Key> using [] or [], and then press [OK].
|
(3)
|
Select a WEP key using [] or [], and then press [OK].
Select the key number to be used for encryption which you wrote down in Step 2..
|
(1)
|
Press [] (Tone), and then select <Entry Mode>.
|
(2)
|
Enter the network key.
You can enter it using the numeric keys.
|
(3)
|
After entering, select <Apply> using [] or [], and then press [OK].
|
(1)
|
Select <Select WEP Key> using [] or [], and then press [OK].
|
(2)
|
Select the WEP key edited in Step 11. using [] or [], and then press [OK].
|
(1)
|
Enter the network key.
Select the character using [] or [], and then press [OK] to enter.
|
(2)
|
After entering, select <Apply> using [] or [], and then press [OK].
|
(1)
|
After entering the network key, select <Select WEP Key> using [] or [], and then press [OK].
|
(2)
|
Select the WEP key edited in Step 11. using [] or [], and then press [OK].
|
If an error message appears, press [OK] to close the screen and check to make sure that the type of encryption, the authentication method or encryption method, the network key are correctly entered. If not, enter the network key again.
If you cannot connect to the access point after retrying, see the following:
|